ATTN: Kris Guilbeaux

[SVO]

What kind of clutch are you running? And/or what would you have prefered to put in there?<br><br>Just looking for opinions,, I have some ideas in mind but just want a public opinion. <p></p><i></i>

[SVO]

Kris also do you know the part # for that little plastic bushing for the sifter that goes down into the transmission, keeps the shifter from being sloppy?<br><br>And what are you gonna charge me for a modded set of hubs from you, I'll supply the set of hubs and then some. <p></p><i></i>

[Kris Guilbeaux]

Here is what I will do on the Hubs you send me as many Junked set you can find I will build you a good set that will last. <br><br>I also have Centerforce Dual Friction clutch Very worth the Money.<br><br>I dont know the Part number but they are not expensive from Ford. I bought a set one time for my Navajo<br><br> <p></p><i></i>

[Kris Guilbeaux]

Also What are you going to do with that Water logged A4LD?<br><br> <p></p><i></i>

[SVO]

Trout line wieght?<br><br>Boat Anchor?<br><br>Paper wieght?<br><br>Core?<br><br>Drop it out of a truck at 70mph?<br><br>Burn it?<br><br>Piss on it?<br><br>Give it to Kris? <p></p><i></i>

[SVO]

<!--EZCODE QUOTE START--><blockquote><strong><em>Quote:</em></strong><hr>Here is what I will do on the Hubs you send me as many Junked set you can find I will build you a good set that will last. <br><br>I also have Centerforce Dual Friction clutch Very worth the Money.<br><br>I dont know the Part number but they are not expensive from Ford. I bought a set one time for my Navajo<hr></blockquote><!--EZCODE QUOTE END--><br><br><br>Ok I'll dig them up and send them to you, PM me from the 'X' board with your addy and I'll get the box to you.<br><br>Kris Centerforce has all ready high scores with me, I had a dual friction in my Mustang SVO that I beat on for 3 years running high 12's and low 13's and still drove it all around town and to Moab and back without a hitch.<br><br>I was just curious if you might have had it, the Ford parts houses here are full of "no parts looking up bunch of rednecks" so I figured that I might save myself some hassle by being able to give them a part number insted of listening to, "are you sure Ford carries parts for that, you know Mazda really is different I don't see how you can cross the two brands?" <p></p><i></i>

[Kris Guilbeaux]

If you want I can ge the Part numbers for you from my Dealer. They are mush nore helpful when I show up.<br><br>Kris<br><br>BTW I am going to send you a Pm.<br> <p></p><i></i>

[Kris Guilbeaux]

I like the Last option the best on the list of things to do with the Bad A4LD <p></p><i></i>

[SVO]

You can have it if you want, but as of right now I have now way of transporting it to you.<br><br>I got your PM.<br><br>You have PM too. <p></p><i></i>

[Kris Guilbeaux]

I want it I just need to figure out how to get it here too...<br><br>Any idea how far Plantersville is from Waco? Since I will be up there for Wedding on the 12th of October <!--EZCODE EMOTICON START :smokin --><img src=http://www.ezboard.com/images/emoticons/smokin.gif ALT=":smokin"><!--EZCODE EMOTICON END--> <p></p><i></i>

[SVO]

Lemme get my rig running and we can meet somewhere, it's not like the tranny is gonna get up and walk away!<br><br>P.S. the extention housing has been removed. <p></p><i></i>

[Kris Guilbeaux]

Why did you take that off <!--EZCODE EMOTICON START :eek --><img src=http://www.ezboard.com/images/emoticons/eek.gif ALT=":eek"><!--EZCODE EMOTICON END--> <br><br>Cause I had a hell of a time trying to find a parking pawl for an A4ld once and It was a pain to find the parts for the Darn thing.<br><br><br><br> <p></p><i>Edited by: <A HREF=http://pub182.ezboard.com/bdemon4x4.showUserPublicProfile?gid=krisguilbeaux@demon4x4>Kris Guilbeaux</A> at: 9/30/03 10:19 pm<br></i>

[SVO]

I have the pawl and spring <!--EZCODE EMOTICON START ;) --><img src=http://www.ezboard.com/images/emoticons/wink.gif ALT=";)"><!--EZCODE EMOTICON END--> <p></p><i></i>

[Kris Guilbeaux]

OK dont lose those. I will fish up another extention houseing. <p></p><i></i>

[SVO]

Kris although I don't have the tranny I still have the pawl and spring sir! <!--EZCODE EMOTICON START ;) --><img src=http://www.ezboard.com/images/emoticons/wink.gif ALT=";)"><!--EZCODE EMOTICON END--> <br><br><br><br>P.S. Your hubs ROCK! <!--EZCODE EMOTICON START :D --><img src=http://www.ezboard.com/images/emoticons/happy.gif ALT=":D"><!--EZCODE EMOTICON END--> <br><br>I still have 2 set to send to you, or deliver. <p></p><i></i>

[Kris Guilbeaux]

cool I am Glad the Hubs work for you. You see the autos are good if they are built right.. <!--EZCODE EMOTICON START :D --><img src=http://www.ezboard.com/images/emoticons/happy.gif ALT=":D"><!--EZCODE EMOTICON END--> <br> <p></p><i></i>