Page 1 of 1
if it is not one thing it is another
Posted:
Fri Sep 19, 2003 3:47 pm
by Kris Guilbeaux
Thats right my friends the Explorer is not running again. This time with a bad miss. I norrowed it down to a driver side injector. <br><br> <p></p><i></i>
Re: if it is not one thing it is another
Posted:
Fri Sep 19, 2003 4:03 pm
by KF5ZXT
Damn, that sucks. How hard are those to replace? <p></p><i></i>
Re: if it is not one thing it is another
Posted:
Fri Sep 19, 2003 6:25 pm
by Kris Guilbeaux
Not terrible to replace it is below the upper intake and attached to the fuel rail. <p></p><i></i>
Re: if it is not one thing it is another
Posted:
Fri Sep 19, 2003 9:01 pm
by Michael
Yep, we had them exposed when we took the top end of your motor apart. They just pop in and out of the fuel rail. You gonna replace one or all of them? I've heard it is cheaper to buy them in eights for a mustang than to buy six individually. <p></p><i></i>
Re: if it is not one thing it is another
Posted:
Sat Sep 20, 2003 8:17 am
by SVO
Doug over at
www.4.0performance sell them pretty darn cheap! <p></p><i></i>
Re: if it is not one thing it is another
Posted:
Tue Sep 23, 2003 5:03 pm
by Kris Guilbeaux
I am just going to buy used ones. I need to just get it running again.<br> <p></p><i></i>
Re: if it is not one thing it is another
Posted:
Tue Sep 23, 2003 7:43 pm
by KF5ZXT
Hey Jeff, what does a long block 4.0 go for? <p></p><i></i>
Re: if it is not one thing it is another
Posted:
Wed Sep 24, 2003 6:11 am
by SVO
Pricing them out I came up with $1800-$2000.<br>Most of them came with a warranty, if I was gonna choose I would go with a Jasper engine.<br><br><!--EZCODE LINK START--><a href="http://www.jasperengines.com">www.jasperengines.com</a><!--EZCODE LINK END--><br> <p></p><i>Edited by: <A HREF=http://pub182.ezboard.com/bdemon4x4.showUserPublicProfile?gid=specialvehicleoperator>Special Vehicle Operator</A> at: 9/24/03 7:11 am<br></i>
Re: if it is not one thing it is another
Posted:
Wed Sep 24, 2003 7:36 am
by KF5ZXT
I was thinking for a pulled unit, rather than a new or rebuilt one. <p></p><i></i>
Re: if it is not one thing it is another
Posted:
Wed Sep 24, 2003 10:08 am
by SVO
$650-$850 <p></p><i></i>
Re: if it is not one thing it is another
Posted:
Wed Oct 01, 2003 12:58 pm
by Kris Guilbeaux
Installed a used injector today. Some good fellow from the explorerforums sent me one for free. Installed it today and the Truck ran great. Now lets see how long this lasts...<br> <p></p><i></i>
Re: if it is not one thing it is another
Posted:
Wed Oct 01, 2003 4:08 pm
by KF5ZXT
At least you don't have to shift your tranny with a length of all-thread. <!--EZCODE EMOTICON START ;) --><img src=http://www.ezboard.com/images/emoticons/wink.gif ALT=";)"><!--EZCODE EMOTICON END--> <p></p><i></i>
Re: if it is not one thing it is another
Posted:
Wed Oct 01, 2003 4:19 pm
by Michael
Hey now, that is an expetly crafted custom shifter <!--EZCODE EMOTICON START :D --><img src=http://www.ezboard.com/images/emoticons/happy.gif ALT=":D"><!--EZCODE EMOTICON END--> <p></p><i></i>
Re: if it is not one thing it is another
Posted:
Thu Oct 02, 2003 12:30 am
by Kris Guilbeaux
Too bad my Tranny is leaking again... <br><br> <p></p><i></i>