Demon4x4.com

My passenger side rockslider is completely on. Looks good and I maxed out my floor jack on it. it hled the weight of the Navajo good.<br><br> <p></p><i></i>

pics? actually, nevermind, I'll just take some when you get here on Sunday <!--EZCODE EMOTICON START :) --><img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT=":)"><!--EZCODE EMOTICON END--> I am interested to see how far they stick out. That reminds me, I sent out an email to her about a week ago to cancel the tranny crossmember portion of the sliders, but she hasn't goten back to me. <p><a href="http://Demon4x4.com/Mudd">91 Moab Edition</a><br><a href="http://Demon4x4.com">Demon4x4.com</a><br><a href="http://Explorer4x4.com">Explorer4x4.com</a></p><i></i>

Here is the Newest photo of my Sliders cut back 4" <br><br><!--EZCODE AUTOLINK START--><a href="http://www.explorerforum.com/data/97cutslider.jpg">www.explorerforum.com/dat...slider.jpg</a><!--EZCODE AUTOLINK END--> <p></p><i></i>

That looks <!--EZCODE ITALIC START--><i> much</i><!--EZCODE ITALIC END--> batter Kris. In fact, you've prompted me to email Gloria and tell her to cut mine back 4". Looks good. <p><a href="http://Demon4x4.com/Mudd">91 Moab Edition</a><br><a href="http://Demon4x4.com">Demon4x4.com</a><br><a href="http://Explorer4x4.com">Explorer4x4.com</a></p><i></i>

I like that alot better Kris. I think that will help to actually protect the body now instead of flexing up into it. <p></p><i></i>

My sliders got shipped out today, so there is a chance that they mat make an appearance at Tellico <!--EZCODE EMOTICON START :) --><img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT=":)"><!--EZCODE EMOTICON END--> I'll confirm when they hit my door. <p></p><i></i>

Too bad I wont be there to see them <!--EZCODE EMOTICON START :( --><img src=http://www.ezboard.com/intl/aenglish/images/emoticons/frown.gif ALT=":("><!--EZCODE EMOTICON END--> <p></p><i></i>

you could always drag out the 'retired' navajo ya know <!--EZCODE EMOTICON START ;) --><img src=http://www.ezboard.com/intl/aenglish/images/emoticons/wink.gif ALT=";)"><!--EZCODE EMOTICON END--> <p></p><i></i>

still have the $$$ issue. Not to mention I might have to replace the torque converter in the green Truck. As soon as the torque converter releases the motor to idle I am hearing nasty noises from the bellhousing. It is shifting in to OD fine now. <p></p><i></i>

The bell housing noise might be the Torque converter ribs rubbing like they were before. Before buying a new one (if the fluid is good in the one you have ie. not burnt or full of metal shavings) my suggestion would be to remove it and slightly grind down those ribs and see if that stops the noise. I doubt that doing so will harm the integrity of the converter at all. <br><br>That is cool that your sliders should be here in time. I'll just have to bash up my rockers. Let me know if you need a hand with the install. <p></p><i></i>

I had my ford Guy hear the noise today. He said that ont he A4LD the Ribs rubbing like that before you install is normal. He told me to install the parking pawl and look for lose parts out side the Tranny. He said if the noise continues to drop the pan and look for metal shavings. <p></p><i></i>

Sliders came in yesterday <!--EZCODE EMOTICON START :) --><img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT=":)"><!--EZCODE EMOTICON END--> So if anyone wants to help me finish off some beer on Saturday I wouldn't mind <!--EZCODE EMOTICON START ;) --><img src=http://www.ezboard.com/intl/aenglish/images/emoticons/wink.gif ALT=";)"><!--EZCODE EMOTICON END--> <p></p><i></i>

Umm...You said the B-word. I'll come by and give you a hand. Que hora? <p></p><i></i>

whenever, I'll be up around 9, I feel like sleeping in. <p></p><i></i>

Cant make it on Saturday. But most likly I will see you on Sunday.<br> <p></p><i></i>

Ok, as you may or may not know, I got my sliders installed this last Sunday.<br><!--EZCODE AUTOLINK START--><a href="http://www.explorerforum.com/data/showgallery.php?cat=3026&ppuser=4107&thumb=1">www.explorerforum.com/dat...07&thumb=1</a><!--EZCODE AUTOLINK END--><br><br>What do ya'll recommend I use to finish the rock sliders with? I want something that will add texture so that you won't slip on them when they are wet.<br><br>Thanks,<br>John <p></p><i></i>

I would say go with Herculiner. Mine don't really get used as steps, so I just spray painted mine. <p></p><i></i>

I would say Herc too, but you will spend plenty of time reapplying it after it gets rubbed off. I have started just spraying the spots where my Herc gets rubbed off with black paint. I would suggest flat black spray paint and then put skate board grip tape on the top surface. It comes in sheets and you can cut it to the size that you want. Very durable as well. <p></p><i></i>

Cool suggestion Michael.<br>That's kind of what I had in mind in the first place. Hopefully I can find it in red to keep the black and red theme going. <br>I'll have to visit Academy soon. <p></p><i></i>