Demon4x4.com

My new project vehicle:

2001
4.0 SOHC
2WD
5r55e
3.73
Graphite Leather
Audiophile Radio
Sunroof
Working A/C

She needs a lot of work under the hood. I have a fluctuating oil pressure issue, lots of suspension work and some transmission sensor issues. Interior is pretty beat up as well, but the exterior is pretty clean for something with 266k and it has no death rattle on the ORIGINAL engine. Transmission has been sloppily replaced, with some kind of rubber tubing connecting a cooler line that split and initiated the sale.















4wd conversion imminent...

I like the color. Planning to make this one the off-road beast?

Now theres a thought

Congrats on the purchase Dan.

Definitely has promise, good luck.

Found some 4wd manuals in the local area running around $500. I can also pick up a 1354e for a song since nobody wants them. I would really like to wire it up to the 4wd switch. I know there is a way to do it, because the ranger used the 1354e for all their electric transfer cases.

I just need to scavenge the hubs and cv joints from the jy and get a set of 4wd rotors. I'll rebuild the old front driveshaft from Red and throw in the diff from Red as well. With all the parts together, it should be a weekend job.

Thoughts?

Yay!!!!!!!!!

Sent from my SM-G900T using Tapatalk

Priced out I expect the whole thing to run about a $1000, depending on the deals I get. I already have half the parts. That 5r is coming out for sure, POS is not holding pressure in reverse and only really works in the 1st and 2nd gears. Manual here I come or a good rebuild for a good price.

I know all that is very possible only thing the PCM is gonna have to be tricked to run the manual or get a PCM from a manual truck.

I just had this thought... I have wanted for a while to drop a 5.0 in Red, so why not do a dual swap? Take the whole drivetrain out of Red and dump it in Sky and then transplant a 5.0 into Red? That takes care of the reliability of my new daily and adds some oomph to the go pedal on my off road rig.

Comments?

Dan who would you get to do these swaps for you?

I was gonna do them myself with occasional help from a local friend.

Define "local" lol.

Randall I'm sure he meant you.

Hope he doesn't need me to do any wiring.

Would definitely be a fire hazard then lol b

Oh come on Randall you are the best one here at all this stuff. Im sure you could get the few wires it would take to do this swap

You're funny. Ugh... just thinking about wiring just gave me a headache.

But I need your help with re-wiring an Explorer

Sure thing.



Dan, what are you planning, suspension-wise?

Local as in less than a mile from my house, though if your volunteering your house for a weekend build i won't turn it down.

Sounds like an excuse for a Demon tech day(s) to me!

Sounds good to me

My garage is full of stuff for a garage sale and Lexus, so I'm out lol.

Well, you don't have many tools, so I'm not sure that you were ever 'in'...