ramman84 mud ride north houston

[ramman84]

powertrain - wore out leaking 318/727/241/d44/9.25/
rolling gear - 38x15.50x15 super swampers made to fit with a sawsawll and BFH
mods- electric cooling fan and new radior made mandatory by rouge battery

[KF5ZXT]

Welcome to the site!


Sent from my iPhone using Tapatalk

[ramman84]

thank you, found this site from some members over on the tx4x4 site. seemed to be a few guys closer to me.

[KF5ZXT]

Probably Justin Klare and I. We're a little spread out, mostly in Austin, but Klare is in Victoria and I am in the Houston area.


Sent from my iPhone using Tapatalk

[TxPlates]

Welcome, don't let Randall scare you off from the site.

[ramman84]

Thanks fir the welcome, as far as the rig goes I have a set of 60s have a 4 inch lift kit for it, when I got it it had been in a rollover currently only has 2 cab mounts. Only has front brakes. And in retrospect was not the best way to load her on the trailer.

[Justin Klare]

Welcome sir!

[ramman84]

Another project im working on
75 Cherokee chief frame with 91 body Soa front workin on the rear next week 360 amc th400 d44s and a quadratrac

[KF5ZXT]

Nice. What's the intended purpose for this one?

[ramman84]

This is the one will be a beach cruiser trail riding rig when done will probably be getting s cage and chop top if I grow the balls to cut the body its in great shape. Currently needs a govoner for the trans and the body lift installed to fit 38s

[TxPlates]

Just make sure you spray the undercarriage off after the beach runs...or you'll get what I've got going on under mine....