Demon JPX Project Truck

[TxPlates]

And then....

[BigTim55]

It started with a whisper!!!!

Sent from my SGH-T989 using Tapatalk 2

[Kris Guilbeaux]

Russell was sniffing glue so it didn't get done. I dunno what he does with him time

[TxPlates]

Sad.

[nice59fordf100]

Lame. We could have done it last night but kris was sniffing glue.

[TxPlates]

How's about now?

[Kris Guilbeaux]

Well I tryed to test fit the trans today but it would not fit between the body and radius arm crossmember. And since my pipe stands are in Victoria I could not pull the crossmember to put the trans

[Kris Guilbeaux]

ImageUploadedByTapatalk1352092859.402865.jpg (100.96 KiB) Viewed 13455 times

Today Russell spent time extending the PCM harness 48" so the PCM will be in the stock location...

ImageUploadedByTapatalk1352092945.781132.jpg (68.66 KiB) Viewed 13455 times

He looks so happy!!!

[KF5ZXT]

Wow, the PCM is 48" away in this model versus later models?


Sent from my iPhone using Tapatalk

[TxPlates]

Seems like a lot of wasted effort when you could just located it closer to where the harness would have reached, and built a water proof box around it etc, no?

[Kris Guilbeaux]

No there was no easy way we added 4 ft of wire...

[TxPlates]

You couldn't just keep it in the engine bay?

[nice59fordf100]

We are mounting the pcm in the stock first Gen location by modifying the second Gen engine bay harness and converting it to a hybrid first Gen harness. Its all very simple

[KF5ZXT]

What's hybrid about it?

[TxPlates]

Is it ecoboost now?


Sent from my iPhone 5 bitch using Tapatalk

[nice59fordf100]

No, it's a second gen harness from a 97 mountaineer that we are retrofitting to 'act' as a first gen harness by utilizing the first gen firewall connector but remaining largely intact as a second gen harness (relay boxes, PDB, Ect) negating the use of the first gen harnesses (2).

[KF5ZXT]

How does it 'act' as a first gen harness?

[nice59fordf100]

Well, it's hard to explain. When i get home,i guess i could upload photos of the wiring diagrams and spreadsheets that will explain it better

[KF5ZXT]

You guess?

[nice59fordf100]

I don't know what you want from me bud. um, the second gen harness will replace the first gen harness and act as the replacement for the first gen harness by incorporating the first gen firewall connecotr (the big round plug) and the secondary connectors (think ac blower motor, frame harness, etc) into it. Doing it this way will make the body/dash harness play nice with the (1) engine bay harness just like it would with the (2) first gen engine bay harnesses

[TxPlates]

But still not an ecoboost?

[nice59fordf100]

Ecoboost? No, that's another project

[nice59fordf100]

Crap Kris, the re-release of JP3D is in april. We need to get on the ball on this!

[TxPlates]

Heard that before....

[Kris Guilbeaux]

I know that's what I been saying but some one got too sniffing glue to finish the last 7 wires last night